[ANN] CADintosh 7.0b2

This area contains the messages from the old Yahoo cadintoshmac group after the port.
RowlandCarson
Posts: 2
Joined: Fri Dec 30, 2016 10:56 am

Re: [ANN] CADintosh 7.0b2

Post by RowlandCarson »

At 2010-05-17 13:01 +0000 lemkesoft wrote: >I released a new beta at http://www.lemkesoft.org/beta.html>>This beta should fix all reported issues Thorsten - I tried the beta today and immediately notice one long-standing problem has been fixed - the "recent files" sub-menu now has the most recent at the top! The full filepath is still shown, which makes it hard to read the filename when pathnames are different lengths. Would it be possible to have the display or not of full pathnames as a preference?Alas, I also found one problem.To switch between the 4 different selection modes (freehand, junction, centre/end and automatic) I can as usual hit the tab key. But if I wish to cycle through the choices in the opposite order by using shift-tab, that does not work properly and is not consistent across all tools.For instance, with the trim tool, if I have auto selected, shift-tab will correctly cycle through centre/end, junction, freehand. But if I have freehand already selected, it just cycles between freehand and junction without incuding the other choices at all.In comparison, with the line tool, if I have auto selected, shift-tab will cycle incorrectly through freehand, junction, centre/end - in other words shift-tab works the same as tab.I haven't investigated other tools but I'm sure you can find the problem from this limited exploration of the symptoms - if not please tell me what tests I should do.Ti PowerBook G4, 1GHz, 1GB RAMMac OS 10.4.11CADintosh V7.0.0b2regardsRowland-- : Rowland Carson ... that's Rowland with a 'w' ...: <rowil@clara.net> http://home.clara.net/rowil/: Skype, Twitter: rowland_carson Facebook: Rowland Carson: pictures: http://picasaweb.google.com/rowlandcarson
thorstenlemke
Posts: 0
Joined: Fri Dec 30, 2016 12:00 pm

Re: [ANN] CADintosh 7.0b2

Post by thorstenlemke »

Hello Rowland,The ellipse is currently a special element. It is currently not supported infor that functions.Thorsten > Von: Rowland Carson <rowil@clara.net>> Antworten an: <cadintoshmac@yahoogroups.com>> Datum: Mon, 17 May 2010 21:24:30 +0100> An: <cadintoshmac@yahoogroups.com>> Betreff: Re: [cadintoshmac] [ANN] CADintosh 7.0b2> > At 2010-05-17 13:01 +0000 lemkesoft wrote:> >> I released a new beta at http://www.lemkesoft.org/beta.html>> >> This beta should fix all reported issues> > Thorsten - I have on many occasions reported that the ellipse tool> does not work as expected. Elliptical arcs cannot be drawn to start> and finish coincident with any other drawing object, and cannot be> trimmed. This beta does not adress that problem. See the file> ellipse_test01.CAD in the problems folder of this Yahoo group.> > regards> > Rowland> -- > : Rowland Carson ... that's Rowland with a 'w' ...> : <rowil@clara.net> http://home.clara.net/rowil/> : Skype, Twitter: rowland_carson Facebook: Rowland Carson> : pictures: http://picasaweb.google.com/rowlandcarson
Kevin
Posts: 0
Joined: Tue Apr 06, 2010 6:15 pm

Re: [ANN] CADintosh 7.0b2

Post by Kevin »

Hi Thorsten and all;The new Beta.dmg mounts perfectly on Tiger - 10.4.11 (on an old G3 at 400 MHz.)Regards,KevinSame here. Does not mount on Snow Leopard. -Chuck- On May 17, 2010, at 8:14 AM, Jim Plante wrote:> Thorsten,> The .dmg won't mount. I've downloaded it twice, and neither would mount.> <Screen shot 2010-05-17 at 8.13.31 AM.png>> > Regards,> Jim Plante> > On May 17, 2010, at 8:01 AM, lemkesoft wrote:> >> Hello,>> >> I released a new beta at http://www.lemkesoft.org/beta.html>> >> This beta should fix all reported issues.>> >> Thorsten
Post Reply