Page 1 of 1
[Solved] How do the various scaling factors work?
Posted: Thu Jul 18, 2019 12:17 am
by RoamingBob
I can't seem to get the knack of using the Scale selection drop down (for example trying to set it to 1/4 in = 1 ft).
Then there is the Scale of Layer 1023 (which is where the page/paper size gets loaded)? How does that work.
Then there are the scale options for alternate units.
Scaling factors!!!
Posted: Tue Sep 03, 2019 6:28 am
by RoamingBob
I am still struggling with doing scale drawings.
I want to do a drawing so that 1 inch = 1 foot.
Alternatively, I can do the whole thing at 1:1. BUT then how do I get it to print at an accurate scaling of 1 inch = 1 foot.
I see where you can ask for a print of the document to be shrunk to one sheet, but what scaling is that going to get?
I had hoped that CADintosh would allow such accurate scale drawings. I'm getting the hang of other parts, but this aspect continues to frustrate me.
I've set the panel top to 1 inch = 1 foot. And I've tried the 1" setting (whatever that means). None of this ends up making sense. Either things are huge relative to the landscape 8-1/2 X 11 sheet, or they are just crazy small.
There is no real guidance in the help PDF.
Re: How do the various scaling factors work?
Posted: Tue Sep 03, 2019 8:28 am
by forum_adm
Please forward your drawing to
support@lemkesoft.com
We will create a short tutorial video.
Thorsten
RoamingBob
Posted: Wed Sep 04, 2019 8:18 pm
by RoamingBob
Okay. I'll get something off in a day or so.
Thanks so much.
Bob
Scaling Factors
Posted: Fri Sep 06, 2019 7:21 pm
by RoamingBob
Thorsten,
Here is an example drawing, done at 1:1 scale. There is a landscape US Letter page on layer 1023.
I'd like to print this at a scale where 1 inch in the printed page corresponds to 1 foot.
Thanks,
- Bob
Re: How do the various scaling factors work?
Posted: Fri Sep 06, 2019 11:20 pm
by forum_adm
Scaling is a bit complex but very important for technical drawings.
1. Select the correct unit before your start with a new drawing under Options/Drawing
- Screen Shot 2019-09-06 at 23.17.53.jpg (115.95 KiB) Viewed 6394 times
2. Select the correct scale in the scale menu for the elements
- Screen Shot 2019-09-06 at 23.18.07.jpg (69.06 KiB) Viewed 6394 times
3. Now make the construction
Re: How do the various scaling factors work?
Posted: Fri Sep 06, 2019 11:36 pm
by forum_adm
We changed now your drawing to 1" = 1'
Re: How do the various scaling factors work?
Posted: Fri Sep 06, 2019 11:38 pm
by forum_adm
You define the print area normally with File/Area/Select Area with Page.
- Screen Shot 2019-09-06 at 23.35.22.jpg (488.97 KiB) Viewed 6394 times
Or select "Print complete drawing onto one page.
Re: How do the various scaling factors work?
Posted: Mon Sep 23, 2019 8:44 am
by forum_adm
We added now a new dialog upon creation of a new drawing.
- Screen Shot 2019-09-23 at 08.43.35.jpg (64.14 KiB) Viewed 6282 times
The user can now set the default unit and matching scale. We hope that this avoids the reported problems.
You can download the latest BETA at:
http://www.lemkesoft.org/beta.html