[ANN] GraphicConverter 8 (Build 829)

[thorstenlemke]

Hello, I released a new beta. Please check: http://www.lemkesoft.org/beta.html Regards Thorsten Lemke

[watcombeman]

Hooray!!! I can now Scan with TWAIN more than once without having to quit and relaunch GC8! Scan in greyscale and in black and white don't work yet, though... Perhaps next time. John. --- In gcmac@yahoogroups.com, "lemkesoft" <lemke@...> wrote: > > Hello, > > I released a new beta. > Please check: > http://www.lemkesoft.org/beta.html > > Regards > Thorsten Lemke >

[Don Sample]

A couple of issues, that have actually been around since GC 7 1) The setting for the Default Frame Size in the preferences does nothing. Whatever value you set for it, there is always a 2 pixel frame around the image. I find that this seems to be just big enough to annoy people who don't want any frame (there have been multiple "why's there there a border around my images?" questions here, ever since version 7 came out) and not quite as big as I want it when I want there to be border, especially since I updated to Lion, and now when I go to grab a selection handle at the edge of an image to move it, I sometimes find myself hitting the window edge instead, and end up resizing the window. 2) If you are stretching a selection (holding down Command, while dragging a selection handle) the visual feedback for the stretch is offset by two pixels, to the left and down. When you let go of the handle, the stretched area snaps back those two pixels.

[Robert Poland]

Thorsten, I see that the coordinates are screwed up again with the Unskew command. At first they are ok but after the first corner is set they all are upside down and reversed. On Apr 17, 2012, at 7:59 AM, lemkesoft wrote: > Hello, > > I released a new beta. > Please check: > http://www.lemkesoft.org/beta.html > > Regards > Thorsten Lemke Robert Poland - Fort Collins, CO

[thorstenlemke]

Hi Bob, I changed here nothing. Thorsten > Von: Robert Poland <rpoland@usa.net> > Antworten an: <gcmac@yahoogroups.com> > Datum: Tue, 17 Apr 2012 14:36:46 -0600 > An: <gcmac@yahoogroups.com> > Betreff: Re: [gcmac] [ANN] GraphicConverter 8 (Build 829) > > Thorsten, > > I see that the coordinates are screwed up again with the Unskew command. At > first they are ok but after the first corner is set they all are upside down > and reversed. > > > On Apr 17, 2012, at 7:59 AM, lemkesoft wrote: > >> Hello, >> >> I released a new beta. >> Please check: >> http://www.lemkesoft.org/beta.html >> >> Regards >> Thorsten Lemke > > Robert Poland - Fort Collins, CO > > >

[watcombeman]

Robert, I don't see that here. The only effect I see is that the coordinates get a tad smaller when you select the first corner (doesn't matter which of the four). Sort of 12-pt to 10-pt? This in itself is odd. John. --- In gcmac@yahoogroups.com, Robert Poland <rpoland@...> wrote: > > Thorsten, > > I see that the coordinates are screwed up again with the Unskew command. At first they are ok but after the first corner is set they all are upside down and reversed. > > > On Apr 17, 2012, at 7:59 AM, lemkesoft wrote: > > > Hello, > > > > I released a new beta. > > Please check: > > http://www.lemkesoft.org/beta.html > > > > Regards > > Thorsten Lemke > > Robert Poland - Fort Collins, CO >

[thorstenlemke]

Hi, That should be fixed with the new build 831. Thorsten > Von: watcombeman <john@yclept.wanadoo.co.uk> > Antworten an: <gcmac@yahoogroups.com> > Datum: Tue, 17 Apr 2012 16:21:09 -0000 > An: <gcmac@yahoogroups.com> > Betreff: [gcmac] Re: [ANN] GraphicConverter 8 (Build 829) > > Hooray!!! > > I can now Scan with TWAIN more than once without having to quit and relaunch > GC8! > > Scan in greyscale and in black and white don't work yet, though... Perhaps > next time. > > John. > > --- In gcmac@yahoogroups.com, "lemkesoft" <lemke@...> wrote: >> >> Hello, >> >> I released a new beta. >> Please check: >> http://www.lemkesoft.org/beta.html >> >> Regards >> Thorsten Lemke >> > >

[watcombeman]

Yes, that has fixed it. Scans in colour, greysacle and B&W all OK. John. --- In gcmac@yahoogroups.com, Thorsten Lemke <lemke@...> wrote: > > Hi, > > That should be fixed with the new build 831. > > Thorsten > > > > Von: watcombeman <john@...> > > Antworten an: <gcmac@yahoogroups.com> > > Datum: Tue, 17 Apr 2012 16:21:09 -0000 > > An: <gcmac@yahoogroups.com> > > Betreff: [gcmac] Re: [ANN] GraphicConverter 8 (Build 829) > > > > Hooray!!! > > > > I can now Scan with TWAIN more than once without having to quit and relaunch > > GC8! > > > > Scan in greyscale and in black and white don't work yet, though... Perhaps > > next time. > > > > John. > > > > --- In gcmac@yahoogroups.com, "lemkesoft" <lemke@> wrote: > >> > >> Hello, > >> > >> I released a new beta. > >> Please check: > >> http://www.lemkesoft.org/beta.html > >> > >> Regards > >> Thorsten Lemke > >> > > > > >

[Robert Poland]

Thorsten,GraphicConverter 8 (Build 831), sandboxedSelect unskew, click Shift + Delete, coordinates reversed…GraphicConverter 8 (Build 831), NOT sandboxedSelect unskew, click Shift + Delete, coordinates reversed…On Apr 18, 2012, at 12:31 AM, Thorsten Lemke wrote: Hi Bob,I changed here nothing.ThorstenVon: Robert Poland <rpoland@usa.net>Antworten an: <gcmac@yahoogroups.com>Datum: Tue, 17 Apr 2012 14:36:46 -0600An: <gcmac@yahoogroups.com>Betreff: Re: [gcmac] [ANN] GraphicConverter 8 (Build 829)Thorsten,I see that the coordinates are screwed up again with the Unskew command. Atfirst they are ok but after the first corner is set they all are upside downand reversed.On Apr 17, 2012, at 7:59 AM, lemkesoft wrote:Hello,I released a new beta.Please check:http://www.lemkesoft.org/beta.htmlRegardsThorsten Lemke Robert Poland - Fort Collins, CO Robert Poland2.7 GHz Intel Core I5, 27” iMac  12 GB Ram, 1TB HD, OS 10.7.3

[watcombeman]

Interesting. I tried that. When I hit <shift><delete> the coordinates just shrank a little. They were not reversed before, and were not after. What is <shift><delete> *supposed* to do, if anything? John. --- In gcmac@yahoogroups.com, Robert Poland <rpoland@...> wrote: > > Thorsten, > > GraphicConverter 8 (Build 831), sandboxed > Select unskew, click Shift + Delete, coordinates reversed� > > GraphicConverter 8 (Build 831), NOT sandboxed > Select unskew, click Shift + Delete, coordinates reversed� > > > On Apr 18, 2012, at 12:31 AM, Thorsten Lemke wrote: > > > Hi Bob, > > > > I changed here nothing. > > > > Thorsten > > > > > >> Von: Robert Poland <rpoland@...> > >> Antworten an: <gcmac@yahoogroups.com> > >> Datum: Tue, 17 Apr 2012 14:36:46 -0600 > >> An: <gcmac@yahoogroups.com> > >> Betreff: Re: [gcmac] [ANN] GraphicConverter 8 (Build 829) > >> > >> Thorsten, > >> > >> I see that the coordinates are screwed up again with the Unskew command. At > >> first they are ok but after the first corner is set they all are upside down > >> and reversed. > >> > >> > >> On Apr 17, 2012, at 7:59 AM, lemkesoft wrote: > >> > >>> Hello, > >>> > >>> I released a new beta. > >>> Please check: > >>> http://www.lemkesoft.org/beta.html > >>> > >>> Regards > >>> Thorsten Lemke > >> > >> Robert Poland - Fort Collins, CO > >> > > Robert Poland > 2.7 GHz Intel Core I5, 27" iMac > 12 GB Ram, 1TB HD, OS 10.7.3 >