Having tech problems? Post them here and do not worry, there is always a solution for you.
7 posts • Page 1 of 1
OK, I read this, but I missing something. First, when I Select Area w/ Page, nothing happens. Then, when I go to Print... Complete Drawing Resized onto One Page, my drawing displays in the Print Preview about 1/4 of the size it should be. Maybe I don't understand something. I have a 7 1/8" and an 8" circle that I want to print and have them be 7 1/8" and 8" on the paper. What to do? Thank you for any suggestions.
OK, but let's first check my settings as per the attached pics, as I may have something set wrong. I selected the Area with "Select Area with Window" but what would print is way too big; see pic. When I tried "Select Area with Page" and click on the drawing, a red rectangle appears that covers 1/4 of the drawing. This looks exactly like what would print if I printed via the Select Area with Window. I hope this helps; if not, I'll zip the file and send it. Thank you. John
- Screen Shot 2020-04-13 at 9.13.16 AM.png (64.54 KiB) Viewed 4501 times
- Screen Shot 2020-04-13 at 9.12.01 AM.png (77.86 KiB) Viewed 4501 times
- Screen Shot 2020-04-13 at 9.10.45 AM.png (49.13 KiB) Viewed 4501 times