[Solved] Reverse geotagging won't stick in some files

The right place to speak and share about your experiences of GraphicConverter
Post Reply
vcaston
Posts: 8
Joined: Tue Feb 18, 2020 7:09 pm

[Solved] Reverse geotagging won't stick in some files

Post by vcaston »

A little puzzled by this, and can't find in manual.

I used Reverse Geotagging on all the files (>1000) in a folder, mostly with success. Of course it didn't do anything to the ones that didn't have GPS data. But of the ones that *did* have GPS data, about 250 didn't fill in the information.

If I selected one individually and Reverse Geotagged it, it filled it in while the dialog was open; but if I went to another file and came back to it, the fields were empty again.

I tried using the Locations window and Updating the files that lacked entries for city etc. Now they have the little pen tip icon in the upper right. But whenever I went back to an individual and reopened it, the fields were empty.

(My hope is to use the city information with Simple rename, so that I can see from the filenames where they were shot.)

Many thanks.
User avatar
forum_adm
Site Admin
Posts: 1814
Joined: Fri Dec 23, 2016 9:41 am
Location: Germany
Country: Germany
Contact:

Re: Reverse geotagging won't stick in some files

Post by forum_adm »

Please email one of the problem files zipped to support@lemkesoft.com for testing.
vcaston
Posts: 8
Joined: Tue Feb 18, 2020 7:09 pm

Re: Reverse geotagging won't stick in some files

Post by vcaston »

Many thanks!
User avatar
forum_adm
Site Admin
Posts: 1814
Joined: Fri Dec 23, 2016 9:41 am
Location: Germany
Country: Germany
Contact:

Re: Reverse geotagging won't stick in some files

Post by forum_adm »

The three files have a wrong extension.

Please correct them with:
Screenshot 2023-02-20 at 15.53.jpg
Screenshot 2023-02-20 at 15.53.jpg (162.8 KiB) Viewed 626 times
Post Reply