[Fixed] Odd behavior with hatching style/attributes

[RoamingBob]

Doing a drawing at 1" = 1' scale.
Got a hatched box shown in below png named 3 inch input hatching with the input attributes in top of composite image. Note hatching distance is 3 in.

3 inch input hatching.png (159.13 KiB) Viewed 1875 times

If the style attributes are reopened, the hatching distance is now reported as 0.118 inches - seem image Reopened Hatching.png. If this is then directly applied, the hatching is so dense as to appear black as presented in the bottom of composite image.

Reopened Hatching.png (178.34 KiB) Viewed 1875 times

This is a bit confounding, since glimpsing the hatching attributes does not immediately make it clear how to reproduce the hatching in another area.

The shrinking of the distance spacing is a bit recursive. If the hatching attributes are reopened and applied again, the spacing keeps shrinking, though I've not taken it to the limit.

[forum_adm]

Please send us the corresponding file zipped, so that we can understand the problem on the basis of your drawing.
Also tell us which macOs and CADintosh version is used.
We will check / fix the problem when we have your file and the information.

Due to the vacation season this may take two weeks.

[RoamingBob]

Here are the version numbers you requested:
Cadintosh X: 8.8.4
Mac OS: Monterey V12.6.7
Attachment below. Layer 1 is locked against editing.
In the zipped version, the displayed attributes for the blue hatched rectangles in layer 2 have drifted from the settings used to generate them, where the spacing was set to 3 inches. Can't explain why.

[forum_adm]

We fixed the issue.

Please download the latest BETA at:
http://www.lemkesoft.org/beta.html

or switch in the menu CADintosh > Settings to the BETA channel and check for updates.

Thorsten